Mobotix Accessories

Cables

Ethernet Patch Cable

  • Appropriate for Q24M camera models
  • Cable with special sealing
  • 2 x RJ45 plug

Connector Cable CamIO

  • Connector cable to M12 camera models (with 4x5 cubic plug > HD-15)
  • Connector cable to M22 camera models (with 4x5 cubic plug > USB)

Connector Cable ExtIO (5m)

  • Appropriate for Q24 camera models (with miniUSB > miniUSB plug)
  • Appropriate for D22/D24 camera models (with miniUSB > miniUSB plug)
  • Appropriate for M22 camera models (with miniUSB > USB plug)
  • Appropriate for M12 / D12 camera models (with miniUSB > HD15 plug)

All cable lengths approx. 5 m

 

Connector Cable ExtIO (1m)

Connector cable with miniUSB > miniUSB plug

  • Appropriate for D22/D24 and Q22 camera models
  • Appropriate for Q24 camera models

Cable lengths approx. 1 m

MxLink - DevKit Extension Set

DevKit Extension Set – 1 meter cable extension between sensor and DevKit board

  • Tx module instead of ribbon cable for coupling to the sensor
  • Rx module for coupling to the DevKit main board
  • MxLink connection cable (1 m)
  • Only available for DevKit
  • Screw connection directly on the DevKit board and sensor
    (sensor to be ordered separately)

Ribbon Cable for DevKit

  • 30cm ribbon cable for connecting MX camera modules
    Note: Ribbon cables 30cm are included in the camera modules.

 

Housing

Lense Cover with Glass Pane for M24 and M22

  • Lens protection for extreme weather conditions
  • Scratch-proof glass
  • For all lenses

Lens Protection for M24 and M22

  • Lens protection, material: plastic
  • Suitable for all lenses

Vandalism Housing for Q24 Sec and Q22 Sec

  • Vandalism-proof housing including lens protection with reinforced dome (3mm polycarbonate)
  • Stainless steel, finish matt or polished
  • Including security screws
  • Ideally suited for surveillance at extremely critical locations

Vandalism Kit for D12

  • Cover of stainless steel
  • Consists of stainless steel cover and security screws
  • Reinforced dome (3mm polycarbonate)
  • Ideally suited for surveillance at extremely critical locations

Vandalism Set for D22/D24

  • Cover of stainless steel
  • Consists of stainless steel cover and security screws
  • Reinforced dome (3mm polycarbonate)
  • Ideally suited for surveillance at extremely critical locations

Dome for D12, D22 and D24 (Replacement Dome)

 

 

Lenses & Sensors

Lenses

Lens

Type

Angle

Focal Length

Image width
   

[H x V]

≙ 35mm equivalent

[in a distance of 10 m]

L22

Super Wide Angle 90°

90° x 67°

f = 4 mm (≙ 22 mm)

20 m x 13,3 m

L32

Wide Angle 60°

60° x 45°

f = 6 mm (≙ 32 mm)

11,5 m x 8,2 m

L43

Wide Angle 45°

45° x 35°

f = 8 mm (≙ 43 mm)

8,2 m x 6,1 m

L65

Tele 31°

31° x 23°

f = 12 mm (≙ 65 mm)

5,5 m x 4 m

L135

Tele 15°

15° x 11°

f = 25 mm (≙ 135 mm)

2,6 m x 1,9 m

Note: In the color sensors, the infrared CUT filter is NOT in the lens, but rather already installed in the lens casing in the camera.

 

CSVario Lens

Vario Lens, in connection with CS lens mount

  • Vario lens for
    MX-M22M-Sec-CSVario
    MX-M22M-Sec-Night-CSVario
    and the new R8 models
    or in connection with CS lens mount
  • f = 4.5 up to 10mm
    (≙ approx. 24 to 54mm on 35mm systems)

Sensor Board (M14)

Sensorboard with M14 adapter for DevKit models

  • Color sensor: 2048x1536 pixels
    Sensitivity: 1-0.05 lux
  • B/W sensor: 1280x960 pixels
    Sensitivity: 0.1-0.005 lux
  • Aluminium block
  • Ribbon cable (approx. 30cm)

Sensor in Aluminium Block (M14)

Sensor with M14 lens mount for DevKit models

  • Color sensor: 2048x1536 pixels
    Sensitivity: 1-0.05 lux
  • B/W sensor: 1280x960 pixels
    Sensitivity: 0.1-0.005 lux
  • Aluminium block
  • Ribbon cable (approx. 30cm)

Sensor in Aluminium Block (M14)

Sensor with M14 lens mount for DevKit models

  • Color sensor: 2048x1536 pixels
    Sensitivity: 1-0.05 lux
  • B/W sensor: 1280x960 pixels
    Sensitivity: 0.1-0.005 lux
  • Aluminium block
  • Ribbon cable (approx. 30cm)

Sensor in Aluminium Block (CS)

Sensor with CS lens mount for DevKit models

  • Color sensor: 2048x1536 pixels
    Sensitivity: 1-0.05 lux
  • B/W sensor: 1280x960 pixels
    Sensitivity: 0.1-0.005 lux
  • Aluminium block
  • Ribbon cable (approx. 30cm)

Special Sensor in Alumibium Block (M14)

DevKit sensor with special long-pass filter (LPF) and M14 lens mount in aluminium block

  • B/W sensor: 1280x960 pixels
    Sensitivity: 0.1-0.005 lux
  • Aluminium block
  • Ribbon cable (approx. 30cm)
  • Special filter (LPF) integrated provides optimal contrast for numberplate recognition

Mounting

In Celiling Set for D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO

  • Consists of in-ceiling mount and mounting parts
  • Easy mounting from front
  • Installation dimension: ∅ 150 mm

The In-Ceiling set allows mounting the cameras in fake ceilings, for example. This type of installation provides optimum protection for the camera and reduces the visible profile to a minimum since the camera only protrudes 24 mm (1 in) from the ceiling.

On-Wall Set for D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO

  • Consists of on-wall mount and mounting parts
  • Also conforms to U.S.installation standards
  • Reliably protects the cabling and allows integrating additional modules within the on-wall mount
  • Dimensions: 165 mm x 37 mm

The On-Wall set can reliably protect external cables if the cables cannot be guided from below the housing but have to be led above the wall. In addition, the On-Wall mount provides ample space for extra modules.

10° On-Wall Set for D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO

  • Consists of on-wall mount and mounting parts
  • Also conforms to U.S.installation standards
  • Reliably protects the cabling and allows integrating additional modules within the on-wall mount
  • Dimensions: 166 mm x 74 mm

The On-Wall set allows the mounting of the camera at a 10° tilt angle. Moreover, it reliably protects external cables if the cables cannot be guided from below the housing but have to be led above the wall. In addition, the On-Wall mount provides ample space for extra modules.

Outdoor Wall Mount for D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO

  • Weatherproof (IP65) wall mount for MOBOTIX dome cameras D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO
  • Covers RJ45 wall outlets
  • Space for expansion modules (battery, UMTS, WLAN, etc.)
  • Easily mounted to poles using pole mount

The Wall Mount is the ideal solution for mounting MOBOTIX dome cameras D22/D24 IT/Sec, Q22/Q24 Sec or ExtIO to walls for indoor and outdoor applications. The camera is absolutely dustproof and resistan against water jets (IP65). The wall mount also covers RJ45 wall outlets and has ample space for additional modules.

Pole Mount For Use With Wall Mount MX-OPT-WH

  • Fastening for Dome wall mount MX-OPT-WH
    (for D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO)
  • 3 mm stainless steel, white
  • Delivery includes mounting parts and 2 stainless steel straps for pole diameters of 60 - 180 mm
  • Wall mount (MX-OPT-WH) is not included in delivery and has to be ordered separately
    Alternatively, a set consisting of pole mount (MX-OPT-MH) and wall mount (MX-OPT-WH) is available

If you would like to mount either the MOBOTIX D22/D24 IT/Sec, Q22/Q24 Sec or ExtIO to a pole, you should consider using the MOBOTIX Pole Mount. This mount can only be used in conjunction with the wall mount. The supplied stainless steel straps allow attaching the mount to poles with diameters between 60 and 180 mm. The Pole Mount is made from 3 mm white powdercoated stainless steel and is just as robust and maintenance-free as the outdoor Wall Mount

Set Pole Mount and Wall Mount for D22/D24 IT/Sec and Q22/Q24 Sec

Set consisting of pole mount (MX-OPT-MH) and wall mount (MX-OPT-WH)

  • Pole Mount for fastening of Dome wall mount
  • 3 mm stainless steel, white
  • Delivery with 2 stainless steel straps for pole diameters of 60 - 180 mm as well as mounting parts
  • Wall mount is weather-proof (IP65) for protection of D22/D24 MonoDome
  • Covers RJ45 wall outlets
  • Space for expansion modules (battery, UMTS, WLAN, etc.)

Wall Mount for D12 and D10

  • Shock-resistant fiberglass-reinforced plastic (PBT), white
  • Covers RJ45 outlet
  • Ample room inside for extras (WLAN, relay, etc.)
  • Polyurethane sealing for mounting to wall
  • Includes stainless steel mounting supply, covers and dowels
  • D12 DualDome with outdoor wall mount attains protection class IP 65 instead of IP 54

Mounting the camera to a wall allows covering RJ45 wall outlets (without frame) and also allows using a defined network end point. Ideally, the Outdoor Wall Mount is mounted over the tested wall outlet, which provides the connections (network, ISDN, Power over Ethernet) to the camera.

Pole and Corner Mount D12 and D10

  • Fastening for Dome wall mount
  • Can be mounted to 90° corners; one DualDome covers two sides
  • 3mm stainless steel, white
  • Includes screws and stainless steel straps for pole diameters 60-180mm
  • Wall mount (MX-WH-Dome for D12 and D10) is not included in delivery

Set Pole/Corner Mount and Wall Mount for D12

Set consisting of pole/corner mount (MX-MH-Dome-ESWS) and wall mount (MX-WH-Dome)

  • Pole/corner Mount for fastening of dome wall mount
  • Can be mounted to 90° corners; one DualDome covers two sides
  • 3 mm stainless steel, white
  • Delivery with mounting parts and 2 stainless steel straps for pole diameters of 60-180mm
  • Wall mount consists of shock-resistant fiberglass-reinforced plastic (PBT), white
  • Covers RJ45 wall outlets
  • Ample room inside for extras (WiFi, relay, etc.)
  • Polyurethane sealing for mounting to wall
  • Includes stainless stell mounting parts, covers and dowels
  • D12 DualDome with outdoor wall mount attains protection class IP65 instead of IP54

SecureFlex Wall and Ceiling Mount for M12 and M10

  • Shock-resistant fiberglass-reinforced composite (PBT), white
  • Turn/tilt unit with concealed cabling
  • Covers RJ45 wall outlets > patented tamper-proof concealed cabling
  • Can be turned left/right ± 90°, tilted downwards -70°
  • Includes stainless steel mounting set, caps and dowels
  • Fits all M12, M10 and M1 cameras

Pole Mount for M24, M22, M12 and M10

  • 3mm stainless steel,white
  • Mast or pole mounting
  • Pole circumference from 60 to 180mm
  • 2 x metal mounting bands, fittings and grommet included

 

Power Supply

 

30V Universal Power Supply with RJ45 Plug

  • For the cameras M12, D12, M22, D22, Q22, M10, M1 and D10 (not suitable for Q24)
  • For the connection of the camera via network power adapter
  • Input voltage: 100-250 V~
  • Output voltage: 30 V=/240 mA

Power Adapter PoE Set

  • PoE injector incl. crossover function for direct connection to the PC
  • For all MOBOTIX cameras except for M1 und M10
  • For the MOBOTIX media converter Mx2wire
  • For all PoE devices iaw. IEEE 802.3 af standard (e.g. VoIP phones, netbooks, router, etc.)
  • For connection to the power network
  • For applications with power sources from 12 to 42 V!
  • For all PoE classes with input voltage starting from 16V !
  • Kit includes blue adapter with 3 sockets RJ45 and universal power supply with RJ45 plug

Power Adapter Set for Power Supply via the network

  • Only for the cameras M12, D12, M22, D22, Q22, M10, M1 & D10
  • Suitable for all camera models
  • Assures sufficient power supply in case no PoE switch is used
  • Includes network power adapter with RJ45 socket (MX-NPA-3-RJ)
    & 30V universal power supply with RJ45 plug (MX-SNT-xxx01-RJ)
  • Only for the cameras M12, D12, M22, D22, Q22, M10, M1 & D10

Network Power Adapter

  • Only for the cameras M12, D12, M22, D22, Q22, M10, M1 and D10
  • Assures sufficient power supply in case no PoE switch is used
  • Mx30 inline power supply using the network cabling to the camera; Pin8 = (+), Pin7 = (-)
  • Integrated cross-over feature for direct connection to the PC
  • 3 sockets RJ45 (power supply, camera, network)

Network Power Box 4 Cameras

  • 4 x Mx30V power supply with 4 integrated network power adapters
  • Power supply input voltage: 100-250V∼
  • Output voltage: 30V=/240mA
  • Only for the cameras M12, D12, M22, D22, Q22, M10, M1 and D10

19" NETPOWER Network Power Rack

  • Mx30V inline power supply using the network cabling to the camera; Pin8 = (+), Pin7 = (-); surge protection
  • Behind the switch for up to 8 or 20 cameras respectively with 2 RJ45 sockets each, inline data signals
  • 19" rack mount with 2 rack units, stainless steel front plate

 

 

Special Accessories

CamIO Extension Module

  • Easy installation and a service friendly structure
  • Interface for the connections of ext. sensors, devices (door contact, light, etc.)
  • 2 x relays (230V/500W)
  • 2 x input, backup, audio

ExtIO Extension Module

  • Extension for MOBOTIX cameras
  • Microphone/speaker
  • PIR sensor for motion detection, temperature sensor
  • Integrated switch functions

 

T24 Accessories  

Video Telephone Grandstream GVX3140

preconfigured by MOBOTIX

Go To Mobotix Main Page

 

If you are looking for information about Mobotix which you cannot find on our website, please do not hesitate to contact one of our sales team on 01926 338822 or email sales@alliance.uk.net. Alternatively their website is www.mobotix.com